PLASTICFIBRE SPA is glad to announce a new addition to its range
of products:
PLASTIGRIT®
is the filament suitable for
production of
abrasive brushes, which are used in a variety
of applications and provide both aggressive treatements and
aesthetic finishings.
Our abrasive filaments PLASTIGRIT® are manufactured
from Polyamide
polymer with the addition of a charge of
up to 30% of silicon
carbide (SIC)
or aluminum oxide
(AL2O3).
The formulation
with Polyamide
6.0 is recommended
for dry applications, whereas
the
formulation with Polyamide 6.12,
is suitable for any
use.
The formulation
with
silicon carbide (SIC) is recommended
for high abrasion
applications. Aluminum Oxide (AL2O3)
can be used for less aggressive
sandings
on softer
materials.
Only highest quality raw materials and additives are used,
in order to provide and guarantee excellent stifness and bend
recovery properties.
PLASTIGRIT®
is subjected to a
severe heat
stabilization, accurate diameter check and control of grit
distribution. These operations ensure that
the filaments are given excellent abrasive
properties, consistent performance and
long lifetime, even under the
most extreme working conditions.
The PLASTIGRIT® product family
is divided
into four main product groups,
based on their use
and on the required degree of
abrasion:
H
High
Abrasion
( 24-36-46 grit)
M Medium
Abrasion
(60-80-120 grit)
L
Light Abrasion
(180-240-320 grit)
EL
Extra Light Abrasion/Finishing,
polishing (500
grit)
PLASTICFIBRE’s
sales team is at
complete disposal
for any further information about PLASTIGRIT® and about
any other filaments in its wide selection of polymeres, which
also includes
:
PVC, PP, PET, PBT, PE, PS, SAN, PA
6.0/6.6/6.10/6.12.
PLASTICFIBRE SPA
– Via Emilia 309/A
- 40011 Anzola
Emilia (BO) Italy
Tel. +39.051.739762 – Fax +39.051.739519
Email: plasticfibre.spa@gmail.com
Web Site:
www.plasticfibre.com
|